Covering of halogen spot lights
Thanks to this covering, a room gets a special flair
Online since: 22/12/2008, Number of visits: 259404
With this cover, Mr. Maalman created a unique lighting with special flair in his bathroom.
He used the following items:
- 2 halogen spot lights
- 2 energy-efficient lamps
- a big MDF board, at least 2 cm thick
- 9 countersunk pot magnets
- 9 bent steel beams with drilled holes
First, Mr. Maalman mounted the spots in the desired position on the ceiling. He placed the energy-efficient lamps that should illuminate the board edges more to the side.
Then he cut the MDF board to the right size (on each side a few centimeters shorter than the ceiling). He sawed round holes for the halogen spot lights.
Then he mounted 9 bent steel beams with screws to the ceiling.
In nine places he screwed a countersunk pot magnet with a diameter of 25 mm to the board. He put the rings in the same position as the steel beams on the ceiling (see graph).
The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.