S-15-01-STIC

Disc magnet self-adhesive Ø 15 mm, height 1 mm

Neodymium, N35, nickel-plated
promptly deliverable

Description

A convenient solution if you want to glue on a disc magnet. This is a very flat disc magnet (15 mm diameter, 1 mm thin) with one self-adhesive side. Simply remove the film, stick it on and your smart mailing or creative arts project is done. You can also use the S-15-01-STIC to hang up photos or office accessories without causing puncture marks or holes. These self-adhesive magnets are shipped in pairs. For example, if you order 20 pieces, you will receive 10 magnet pairs.

Please note: Self-adhesive magnets need to be placed, pressed and dried on suitable surfaces to adhere properly. Please read our FAQ about self-adhesive magnets.
Read about more features and tips

Technical data

Article ID S-15-01-STIC
EAN 7640155437844
Material NdFeB
Shape Disc self-adhesive
Diameter 15 mm
Height 1 mm
Tolerance +/- 0,1 mm
Direction of magnetisation axial (parallel to height)
Coating Nickel-plated (Ni-Cu-Ni)
Magnetisation N35
Strength approx. 820 g (approx. 8,04 N)
Max. working temperature 80°C (possibly lower)
Adhesive 3M, No. 467MP
Shelf life adhesive 12 months (approx.)
Weight 1,3 g
Adhesive data sheet
PDF data sheet

Additional features and tips


Click to enlarge
Every magnet is self-adhesive on one side. Thanks to a small flap the film can be peeled off easily.

Click to enlarge
The magnets will be delivered in pairs, meaning one half with a self-adhesive south pole and one half with a self-adhesive north pole.
A sales unit contains a strip with 10 magnet pairs, which equals 20 individual magnets. If you order 20 pieces in the shop, you'll receive a strip as show in the picture.
Self-adhesive magnets need to be placed, pressed and dried on suitable surfaces to adhere properly. Please read our FAQ about self-adhesive magnets.
The used adhesive is a 3M adhesive (type 467MP). The English data sheet for the adhesive can be found here: 3M data sheet (PDF)
The S-15-01-STIC is also suitable for creating large mailings or press kits: Glue a magnet on one side.
Place the second magnet with the protective film on it - the two magnets fit exactly on top of each other.
Then you can take off the protective film and press the magnets onto the latch of the mailing.
The two sides stick together "magically" and can be be opened and closed multiple times.
This magnet is also suitable for creating name tags. Just glue a magnet on the backside...
... and your name tag is ready. You can find tips and tricks in our FAQ about name tags.
If you use business cards as name tags, we recommend the PET card holder in business card format.
A selection of our self-adhesive magnets: From 1 mm thin to 3 kg adhesive force - with or without foam, round or angular - the appropriate self-adhesive magnet for your every need.
Up