Questions and answers about magnet coatings
Table of Contents
Why are magnets coated?
The coating protects neodymium magnets from corrosion. Without this coating, they would oxidise, i.e. rust. Since neodymium magnets are made of an extremely brittle material, the coating also serves to protect their surface. In short, the coating makes the magnets more durable.Why are neodymium magnets coated?
Neodymium reacts with oxygen and oxidises very quickly if left untreated. That is why all the neodymium magnets in our shop are coated with a protective layer. Nickel is by far the most common coating for neodymium magnets.Why are ferrite magnets not coated?
Ferrite magnets are weather-resistant even without additional protection. This means that, in most cases, no extra coating is required. While it is certainly possible to apply various types of coatings to ferrite magnets, doing so is technically very complex and expensive. The cost of the coating would significantly exceed the price of the magnet itself. For this reason, we only offer uncoated ferrite magnets in our shop.Which coating is suitable for outdoor use or damp environments?
Fully rubber-coated magnets are suitable for long-term use outdoors or in damp environments. Magnets with an epoxy resin coating (Ni-Cu-Ni-epoxy) or a non-stick coating (PTFE/PFAS) are also suitable for outdoor use, but should be replaced after a certain period of time.Are coated magnets protected against rust and water?
No, most coatings do not protect the magnet from rust and water. Only fully rubber-coated magnets are completely protected against rust and water. Magnets with an epoxy resin coating (Ni-Cu-Ni-epoxy) or a non-stick coating (PTFE/PFAS) are virtually waterproof.Does the coating weaken the adhesive force of a magnet?
No, the coating is usually so thin that it does not affect a magnet’s adhesive force. For more information regarding adhesive force, please visit our FAQ page What factors affect the adhesive force and strength of a magnet?.What types of coatings are available for neodymium magnets?
We use the following coatings on our neodymium magnets:What are the characteristics of a nickel coating (Ni-Cu-Ni)?
- By far the most frequently used coating
- Colour: shiny metallic
- Good price/performance ratio
- Thickness: approx. 12 micro metres
What are the characteristics of a gold coating (Ni-Cu-Ni-Au)?
- Razor-thin coating (24k) over normal Ni-Cu-Ni coat, but with the same features
- Colour: shiny metallic
- Thickness of gold-coating without Ni-Cu-Ni: 0,05 micro metre
- Thickness of whole coating: approx. 12 micro metres
- The gold-coating rubs off easily with frequent use. It is therefore suitable for decorative purposes only, not for playing or working.
What are the characteristics of a chrome coating (Ni-Cu-Ni-Cr)?
- Better resistance against rubbing and pressure (that's why we use this coating for our sphere magnets)
- Colour: dull, grey-metallic
- Thickness: approx. 15 micro metres
What are the characteristics of a copper coating (Ni-Cu)?
- Colour: shiny brown-red-gold. The colour may change over time due to oxidation (darkening, spots)!
- Slightly weaker rubbing and impact resistance than Ni-Cu-Ni
- Slightly weaker corrosion resistance than als Ni-Cu-Ni
- Thickness: approx. 10 micro metres
- The copper-coloured surface rubs off with frequent use (similar to gold-coated magnets) and is therefore suitable for decorative purposes only.
What are the characteristics of an epoxy resin coating (Ni-Cu-Ni-epoxy)?
(in exceptional cases, epoxy alone)- Colour: black
- Almost 100% non-corrosive, as long as coating is intact
- Not shock-resistant (crumbles quickly)
- Thickness: approx. 10 micrometre
- Even the smallest, not visible to the eye, damages of the coating will cause damage to the magnet in the long term when exposed to moisture.
What are the characteristics of a zinc coating (Zn)?
- Colour: matt grey/blueish
- Only zinc without Ni-Cu-Ni
- More susceptible to corrosion than Ni-Cu-Ni
- Can leave black marks
- Thickness: approx. 4 micrometres
What are the characteristics of a nickel-zinc coating (Ni-Cu-Ni-Zn)?
- Colour: matt silver, slightly grey/bluish
- Ni-Cu-Ni with a layer of zinc
- Less susceptible to corrosion than Ni-Cu-Ni
- Thickness: 12–15 micrometres
1 item
Load...
S-04-05-Z
Rod magnet Ø 4 mm, height 5 mm, holds approx. 630 g, neodymium, N45, zinc-plated
Rod magnet Ø 4 mm, height 5 mm, holds approx. 630 g, neodymium, N45, zinc-plated
| 20 pcs. | 0,27 EUR ea.* | |
| from | 60 pcs. | 0,24 EUR ea.* |
| from | 140 pcs. | 0,22 EUR ea.* |
| from | 360 pcs. | 0,20 EUR ea.* |
| Ask for a rebate from 1 300 pcs. | ||
available: 178 040 pcs.
What are the characteristics of a non-stick coating (PTFE/PFAS)?
- Grey/anthracite
- Non-stick coating (PTFE/PFAS) only, without Ni-Cu-Ni
- Nearly waterproof
- Very abrasion-resistant
- Thickness: 12-25 micrometres
What are the characteristics of a silver coating (Ni-Cu-Ni-Ag)?
- Shiny silver
- Razor-thin coating over regular Ni-Cu-Ni coating, hence the same attributes
- Difference purely visual
- Material: Sterling Silver
- Thickness: approx. 12 micrometres
What are the characteristics of magnets without a coating?
- Naked magnet material, black/grey
- Magnets oxidise and corrode quickly when they come in contact with oxygen and water
- Magnets need to be covered air- and watertight quickly
- We do not recommend having uncoated magnets manufactured.
Please note: There are a variety of other coatings for neodymium magnets that we do not offer in our standard assortment. The pictured coatings are for illustration purposes only. Their proportions do not correspond to reality.
How do I choose the correct coating?
With the many differently coated magnets in the supermagnete assortment, the choice can be difficult. That is why we are providing you with the table below to assist in your decision. When choosing a magnet, it is not just factors such as adhesive force or dimensions that are key but also the coating. As a general rule, select the coating based on the intended use of the magnets.| Indoors* | Humidity | Water** | Adhesive*** | |
|---|---|---|---|---|
| Nickel (Ni-Cu-Ni) | Good | Okay | Bad | Good |
| Gold plating (Ni-Cu-Ni-Au) | Good | Okay | Bad | Good |
| Chrome (Ni-Cu-Ni-Cr) | Good | Okay | Bad | Good |
| Copper (Ni-Cu) | Good | Okay | Bad | Good |
| Epoxy resin (Ni-Cu-Ni-Epoxy) | Good | Good | Okay | Good |
| Zinc (Zn) | Good | Okay | Bad | Good |
| Nickel-zinc (Ni-Cu-Ni-Zn) | Good | Okay | Bad | Good |
| Non-stick coating (PTFE/PFAS) | Good | Good | Okay | Bad |
| Silver (Ni-Cu-Ni-Ag) | Good | Okay | Bad | Good |
| Rubber coating | Good | Good**** | Good***** | Okay |
* Dry interior areas
** Freshwater
*** Can’t be said in general, as there are adhesives available for a wide range of coatings.
**** Pertains to rubber-coated disc magnets (fully rubberised). Partially rubberised magnet systems are only recommended for short term use in damp environments.
***** Pertains to rubber-coated disc magnets (fully rubberised). Partially rubberised magnet systems are ill-suited for use in water.
Are pot magnets coated?
Our pot magnets, if not otherwise noted, are neodymium magnets with a Ni-Cu-Ni coating. The term "coating" in the product descriptions of pot magnets refers to the steel pot around the magnet. In most cases it is nickel (Ni); for the pot magnets that are painted white, green or black it is nickel with an additional powder coating.What happens when the coating on a magnet is damaged?
If the coating on your magnet is damaged, moisture can penetrate and the magnet will start to rust. You can learn more about chipped coatings on our FAQ page Questions and answers about chipping and breaking magnets.Additional information about magnets
In our FAQ pages you can find, among other things, information on these fascinating topics:
- An in-depth comparison of ferrite and neodymium magnets
- Manufacturing process of neodymium magnets
- Factors influencing the adhesive force of magnets
- "Why does the coating of my magnets chip?"
If you would like to learn more about the origin of magnets and their history, take a look at our guide page on The History of Magnets for interesting facts on the subject.