Which magnets are suitable for collecting iron pieces?
In the supermagnete assortment, you will find a variety of magnets with which you can collect iron pieces.
On this FAQ page, we will show you information on various application examples and give specific recommendations for suitable magnets.
Table of Contents
Collecting metallic objects
You want to pick up nails, needles or other dangerous metal objects from the floor, so no humans or animals get hurt?
A good solution is to equip a broom with strong magnets and search the ground with it.
We recommend using flat block magnets or strong disc magnets:
- Q-15-15-08-N: Block magnet 15 x 15 x 8 mm
- Q-20-20-05-N: Block magnet 20 x 20 x 5 mm
- S-20-10-N: Disc magnet Ø 20 mm, height 10 mm
You can read a detailed report about this method in our customer project "Magnetic broom".
If you don not have time to equip your broom with magnets, you can use a simpler method.
Just put a strong magnet into a sturdy plastic bag to collect nails or screws.
When you are done, just turn the bag inside out and remove the magnet.
This practical solution is explained in more detail in the application "Nail collector".
-
1 pc. 2,73 EUR ea.*
Block magnet 30 x 10 x 5 mm, holds approx. 6,5 kg -
1 pc. 3,73 EUR ea.*
Block magnet 40 x 10 x 5 mm, holds approx. 9,5 kg -
1 pc. 3,22 EUR ea.*
Block magnet 19,05 x 12,7 x 6,35 mm, holds approx. 6,5 kg -
1 pc. 4,12 EUR ea.*
Block magnet 25 x 15 x 6 mm, holds approx. 7 kg -
1 pc. 3,51 EUR ea.*
Block magnet 15 x 15 x 8 mm, holds approx. 7,6 kg -
1 pc. 5,79 EUR ea.*
Block magnet 20 x 20 x 10 mm, holds approx. 12 kg -
1 pc. 4,31 EUR ea.*
Block magnet 20 x 20 x 5 mm, holds approx. 6 kg
Collecting fine iron particles
Many industrial companies want to prevent iron particles from the production facility end up in their products.
There are specialised businesses that offer magnet systems for sorting out iron particles.
We do not carry such products.
But you can try the following: Attach several block magnets, e.g. Q-15-15-08-N (for small facilities) or even Q-40-20-10-N (for large facilities), next to each other on a board and place that board close to your production facility. These are very strong magnets that may interfere with your facility (induction or eddy currents). We recommend doing some tests first.
But you can try the following: Attach several block magnets, e.g. Q-15-15-08-N (for small facilities) or even Q-40-20-10-N (for large facilities), next to each other on a board and place that board close to your production facility. These are very strong magnets that may interfere with your facility (induction or eddy currents). We recommend doing some tests first.
When drilling iron or metal workpieces, chips can fly everywhere.
Strong magnets made of neodymium can help in this situation too.
Simply place the magnet close to the spot where you want to drill.
As you can see in the photo, the magnet is completely covered in drill chips.
Here too, we recommend that you put the magnet inside a sturdy plastic bag so that you can easily detach the metal shavings from the magnet.
You can find all of the information and a video of this project on the page "Catching drill chips".
If you want to collect iron particles in your spare time, you can find good instructions and a fascinating video in this customer project: Collecting iron powder on the beach.
The fine iron powder is, for instance, well suited for experiments with magnets.
Collecting it is also a lot of fun.
If you find that, after picking it up, the iron powder is difficult to remove from the magnet, then we have a tip for you.
In the project "Remove iron filings from magnets", you can learn how to detach iron powder from a magnet using simple tools.