Neodymium hook magnet white Ø 40,3 mm, holds approx. 50 kg

powder-coated, thread M6

Attribute name	Attribute value
Item number	FTNW-40
Strength	approx. 50 kg
Displacement force	approx. 10 kg
Unit of Sale	1 piece

Description

This strong magnetic hook has a white powder-coating. The coating is applied through an electrostatic process and is free of harmful substances. Thanks to its colour, the magnetic hook is inconspicuous when mounted on white walls or ceilings.

If you would like to attach the hook magnet to a ferromagnetic surface on a wall, please take note of the displacement force indicated above. This specification corresponds to the maximum weight the magnetic hook can support on the wall under optimal conditions.

Please note: Carefully screw the hook into the threaded bushing as far as it will go.

The full adhesive force is achieved when the ferromagnetic counterpart is smooth and of sufficient thickness and when the pot magnet makes direct and full flush contact. Pot magnets already lose much of their adhesive force at a distance of only half a millimetre to the ferromagnetic surface. This characteristic is more pronounced in pot magnets than in other ferrite and neodymium magnets. You can find additional fascinating information on our FAQ page about pot magnet features.

Technical data

Attribute name	Attribute value
Article ID	FTNW-40
EAN	7640155432573
Material	NdFeB
Strength	approx. 50 kg (approx. 490 N)
Displacement force	approx. 10 kg (approx. 98,1 N)
Colour	White
Design	With round hook
Pot diameter D	40,3 mm
Neck diameter d	15,3 mm
Pot height H1	9,3 mm
Total height without hook H2	18,3 mm
Total height with hook H3	59,3 mm
Thread size	M6
Hook opening width a	18,7 mm
Hook inside diameter b	25,7 mm
Tolerance	+/- 0,2 mm
Coating	Nickel-coated (Ni-Cu-Ni), powder coated
Magnetisation	N38
Max. working temperature	80 °C
Shape	Disc
Steel	Q235 (China)
Weight	110 g
PDF data sheet

Product Safety Information

Manufacturer: Webcraft GmbH / supermagnete, Industriepark 206, 78244 Gottmadingen, Germany, support@supermagnete.com

Magnets are not toys. Please make sure to carefully read our safety instructions.

Additional features and tips

The structure of pot magnets

Pot magnets have a neodymium or ferrite magnet built into a steel pot. When it comes into direct contact with a surface, its force will be focused on the holding surface as a result. This increases the adhesive force of the magnet. For more information, please refer to our FAQ page on the characteristics of pot magnets.

You can unscrew the hook from the pot.

The answer to why you can arrange pot magnets only side by side can be found under our FAQ.

With these strong magnetic hooks, you can conveniently attach heavy clothing, household objects, etc. to ferromagnetic surfaces. The magnetic hooks reveal their full adhesive force when attached to the underside of thick steel beams and the load pulls vertically downward. When attached to a wall, on the other hand, they can hold noticeably less weight (see FAQ about displacement force).

The graph shows the maximum adhesive force in kg (y axis) at various distances in mm (x axis) between magnet and counterpart (steel plate).

Example: At a 2 mm distance between magnet and steel plate the maximum adhesive force is still approximately 11 kg.