Fishing magnet 200

This fishing magnet, with its legendary 200 kg adhesive force, may perhaps look harmless. But please be aware that this magnet has the same adhesive force as the second strongest magnet in our shop to date. And that is saying something!
In contrast to regular retrieving magnets, this magnet is magnetic on both sides. That is to say, the underside, as well as the top, has an adhesive force of 200 kg thanks to the steel casing. The principle is the same as with our pot magnets: Because the two built-in ring magnets are encased in steel, with direct contact, their forces are focused towards the holding surfaces. This results in a particularly high magnetic adhesive force at the contact surfaces.

This fishing magnet has another great feature: It contains two inner threads to hold eyebolts with M10 thread. One such eyebolt is included in the delivery. When screwing in the bolt, make absolutely sure that it is securely fastened. You can order a suitable rope separately in our shop. Matching accessories such as ropes and storage bags can be found under the links below.

Please note: The fishing magnet 200 will only reach its full force if the surface is flat, smooth and thick enough. In addition, the magnet must make direct and full contact with it. If all of these conditions are not met, a pot magnet may have significantly less adhesive force than, for example, a ring magnet with the same or even weaker adhesive force. Furthermore, the full adhesive force only applies if you pull the magnet off the surface in a perpendicular direction (i.e. at a 90-degree angle to the surface). The adhesive force is considerably lower when you pull the retrieving magnet off the surface sideways. You can find more information about this topic on our FAQ page "adhesive force vs shear force".

Included in the delivery: Fishing magnet and eyebolt M10.

Manufacturer: Webcraft GmbH / supermagnete, Industriepark 206, 78244 Gottmadingen, Germany, support@supermagnete.com